AERO 309 Module 8 HW - AResearchers

College of Aeronautics | worldwide.erau.edu

All rights are reserved. The material contained herein is the copyright property of Embry-Riddle Aeronautical University, Daytona Beach, Florida, 32114. No part of this material may be reproduced, stored in a retrieval system or transmitted in any form, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of the University.

AERO 309 – Module 8 Homework In this assignment, you may work in either the SI or BGS system, but you must be consistent.

1. Create the CMcg versus α plot a. List the aircraft you have been using for the previous assignments. List the wing

area and the average wing chord. We will use the average wing chord as the reference chord in this homework.

b. Assume that the horizontal tail area is 20% of the wing area. Calculate the tail

area St. c. Assume that the distance from the center of gravity to the aerodynamic center of

the tail is 160% of the wing’s average chord. Calculate lt. Calculate the tail volume VH.

d. Using a tail aspect ratio of 5 and an efficiency e1 of 0.9, calculate the lift curve slope of the horizontal tail at. Assume that the tail airfoil has a0=0.11 /deg

e. We will assume that αL=0 for the airplane is the αL=0 of the NACA 23012 airfoil. Using the airfoil plots in the book, what is αL=0?

f. We will assume that the aerodynamic center of the wing-body is located at 0.25c

and the center of gravity is located at 0.4c. Calculate (h-hac,wb). [Remember that h and hac,wb are nondimensional]

g. Let us use it=-2°, ε0=0, and [∂ε] / [∂α] =0.35. We now have enough information to plot CMcg vs α

CMcg=CMac,wb+a (α-αL=0) (h-hacwb-VH [at] / [a] (1- [∂ε] / [∂α] ) ) +VHat (it+ε0) Use CMac,wb=0.1. The “a” in the equation is the lift curve slope of your wing (found in Homework 5). Use Excel to plot CMcg from αL=0 to at least α=10°. [Note: the letter “a” and the Greek letter alpha look very similar in the above equation. Make sure to

use the correct values.]

h. Calculate [∂Cm,cg] / [∂α] either through your plot or by equation. Is the aircraft stable? Why?

i. From your plot, what is the trim angle of attack? Youmay have to extend your CMcg plot to find the answer. Remember that trim is when CMcg=0. It is possible for there

not to be a trim point. If this is the case, explain why.

2. Now you will create the CMcg versus α plot when the CG is at 0.3c. a. Since the CG moved, calculate the new lt and VH.

b. Use Excel to plot the new CMcg versus α. Add this plot to the one created for problem 1.

c. From your new plot, what is [∂Cm,cg] / [∂α] for the 0.3c case. Is this new CG location stable? Why?

d. What is the new trim angle of attack?

3. Now create the CMcg versus α plot when the CG is at 0.5c. Plot all three CG locations on one plot. Remember that lt will also have changed when the CG moved.

a. Since the CG moved, calculate the new lt and VH.

Page 2 of 2

b. Use Excel to plot the new CMcg versus α. Add this plot to the one created for problems 1 and 2.

c. From your new plot, what is [∂Cm,cg] / [∂α] for the 0.5c case. Is this new CG location stable? Why?

d. What is the new trim angle of attack? 4. Using the results from problems 1 through 3

a. Using the [∂Cm,cg] / [∂α] for the three CG locations, estimate where the neutral point is on the aircraft. Remember that at the neutral point, [∂Cm,cg] / [∂α] =0. (Hint:

use linear interpolation) b. Find the neutral point via equation. c. Calculate the static margin for all three CG locations.

5. Using the CG location of 0.4c, now change the it to 5° and -5°. Plot all three tail incidence angles on one plot. While we are changing the tail incidence angle, the results are

analogous to moving an elevator up or down. What are the new trim angles of attack?

Why Use Our Services

1. Professional & Expert Writers: AResearchers only hires the best. Our writers are specially selected and recruited, after which they undergo further training to perfect their skills for specialization purposes. Moreover, our writers are holders of masters and Ph.D. degrees. They have impressive academic records, besides being native English speakers.

2. Top Quality Papers: Our customers are always guaranteed of papers that exceed their expectations. All our writers have +5 years of experience. This implies that all papers are written by individuals who are experts in their fields. In addition, the quality team reviews all the papers before sending them to the customers.

3. Plagiarism-Free Papers: All papers provided by AResearchers are written from scratch. Appropriate referencing and citation of key information are followed. Plagiarism checkers are used by the Quality assurance team and our editors just to double-check that there are no instances of plagiarism.

4. Timely Delivery: Time wasted is equivalent to a failed dedication and commitment. AResearchers is known for timely delivery of any pending customer orders. Customers are well informed of the progress of their papers to ensure they keep track of what the writer is providing before the final draft is sent for grading.

5. Affordable Prices: Our prices are fairly structured to fit in all groups. Any customer willing to place their assignments with us can do so at very affordable prices. In addition, our customers enjoy regular discounts and bonuses. First time customer will receive three free pages on their first order.

6. 24/7 Customer Support: At AResearchers, we have put in place a team of experts who answer to all customer inquiries promptly. The best part is the ever-availability of the team. Customers can make inquiries anytime.